Class Z Pin Gage Sets (Inch)
Class Z Pin Gage Sets (Inch)
| Item ID | Tolerance Direction | Size Range | No. of Gages | Weight (lbs.) |
|---|---|---|---|---|
| M0P | Plus | 0.011" to 0.060" | 50 | 1 |
| M0M | Minus | 0.011" to 0.060" | 50 | 1 |
| M05P | Plus | 0.0115" to 0.0605" | 50 | 1 |
| M05M | Minus | 0.0115" to 0.0605" | 50 | 1 |
| C10P | Plus | 0.011" to 0.250" | 240 | 8 |
| C10M | Minus | 0.011" to 0.250" | 240 | 8 |
| C105P | Plus | 0.0115" to 0.2505" | 240 | 8 |
| C105M | Minus | 0.0115" to 0.2505" | 240 | 8 |
| M1P | Plus | 0.061" to 0.250" | 190 | 8 |
| M1M | Minus | 0.061" to 0.250" | 190 | 8 |
| M15P | Plus | 0.0615" to 0.2505" | 190 | 8 |
| M15M | Minus | 0.0615" to 0.2505" | 190 | 8 |
| M2P | Plus | 0.251" to 0.500" | 250 | 23 |
| M2M | Minus | 0.251" to 0.500" | 250 | 23 |
| M25P | Plus | 0.2515" to 0.5005" | 250 | 23 |
| M25M | Minus | 0.2515" to 0.5005" | 250 | 23 |
| M3P | Plus | 0.501" to 0.625" | 125 | 24 |
| M3M | Minus | 0.501" to 0.625" | 125 | 24 |
| M35P | Plus | 0.5015" to 0.6255" | 125 | 24 |
| M35M | Minus | 0.5015" to 0.6255" | 125 | 24 |
| M4P | Plus | 0.626" to 0.750" | 125 | 33 |
| M4M | Minus | 0.626" to 0.750" | 125 | 33 |
| M45P | Plus | 0.6265" to 0.7505" | 125 | 33 |
| M45M | Minus | 0.6265" to 0.7505" | 125 | 33 |
| M5P | Plus | 0.751" to 0.832" | 82 | 29 |
| M5M | Minus | 0.751" to 0.832" | 82 | 29 |
| M55P | Plus | 0.7515" to 0.8325" | 82 | 29 |
| M55M | Minus | 0.7515" to 0.8325" | 82 | 29 |
| M6P | Plus | 0.833" to 0.916" | 84 | 35 |
| M6M | Minus | 0.833" to 0.916" | 84 | 35 |
| M65P | Plus | 0.8335" to 0.9165" | 84 | 35 |
| M65M | Minus | 0.8335" to 0.9165" | 84 | 35 |
| M7P | Plus | 0.917" to 1.000" | 84 | 41 |
| M7M | Minus | 0.917" to 1.000" | 84 | 41 |
| M75P | Plus | 0.9175" to 1.0005" | 84 | 41 |
| M75M | Minus | 0.9175" to 1.0005" | 84 | 41 |
FEATURES:
MORE FEATURES THAN GAGES COSTING TWICE THE PRICE.
All gages and sets are traceable to NIST
- Boxes and gages both marked
- Size and serial number laser etched on each piece (M-0 not etched)
- Material: 52100 Bearing Steel
- No sharp edges
- All members 2” long
USES:
- Checking locations
- Measuring hole sizes and depth
- GO & NOGO gaging
- Setting micrometers
- Checking distances between holes
FINISH:
- Each gage is inspected and has an 8 microfinish or better
- Heat treated to a hardness of 60-62 Rockwell C
- All English gages with 0.0001” limit